Publications and Patents
-
Yashaswi M, Viraj K Bharadwaj, and Madhav Rao,
Novel Approximate Multiplier Designs for Edge Detection Application,
2021 Proceedings of the 2021 on Great Lakes Symposium on VLSI, June 2021.
-
Aravind Reddy, Vikas Vazhayil, and Madhav Rao,
Decimeter Level Indoor Localisation with a Single WiFi Router using CSI Fingerprinting,
2021 IEEE Wireless Communications and Networking Conference (WCNC), March 2021.
-
Ajay B S, and Madhav Rao,
Binary neural network based real time emotion detection on an edge computing device to detect passenger anomaly,
2021 34th International Conference on VLSI Design and 2021 20th International Conference on Embedded Systems (VLSID), February, 2021.
-
Sharmila Mani, and Madhav Rao,
Feasibility Study of using MyoBand for Learning Electronic Keyboard,
2020 25th International Conference on Pattern Recognition (ICPR), January, 2020.
-
Pratyush Nandi, Anubhav Mishra, Pranav Kedia, and Madhav Rao,
Design of a real-time autonomous in-cabin sensory system to detect passenger anomaly,
2020 IEEE Intelligent Vehicles Symposium (IV), November, 2020.
-
Gopika Gopan, S V R Aditya Reddy, Kumaresh Krishnan, Madhav Rao, and Neelam Sinha,
EEG analysis of mathematical cognitive function and startle response using single channel electrode,
CSI Transactions on ICT, 367-376, 2020.
-
Vinay K, Krishna Nagaraj, H R Arvinda, Vikas Vazhayil, and Madhav Rao,
Design of a Device for Lower Limb Prophylaxis and Exercise,
IEEE Journal of Translational Engineering in Health and Medicine, 1-7, 2020.
-
Sharmila Mani, Vinay C K, Pon Deepika, and Madhav Rao,
Surface EMG signal classification for unsupervised musical keyboard learning application,
2020 IEEE Sensors, 25-28 October, 2020.
-
Pon Deepika, Sriram Marisetty, Pavan K, Vinay C K, Srikanth T K, Vikas Vazhayil,and Madhav Rao,
Autonomous Neuro-Navigation System for Neurosurgical Robotics,
2020 IEEE Sensors, 25-28 October, 2020.
-
Karthik S, Karthick D, Sanjaya M V, and Madhav Rao,
Design and Implementation of a Low Power Ternary Content Addressable Memory (TCAM),
2020 International SoC Design Conference (ISOCC), October, 2020.
-
Arvind R, Ronak Doshi, Aravind Reddy, Kirit Arumalla, Anita Mahadevan, Vikas Vazhayil, and Madhav Rao,
Design and Development Of A Flexible Robotic Operative Microscope For Neurosurgical Applications,
2020 IEEE International Conference on Mechatronics and Automation (ICMA), September, 2020.
-
Madhav Rao,
Electrical modeling of Copper and Mixed Carbon bundles as a composite for 3D Interconnect applications,
2020 IEEE 15th International Conference on Nano/Micro Engineered and Molecular System (NEMS), October, 2020.
-
Vikas Vazhayil, Aravind Reddy, Kirit Arumalla, Ronak Doshi, Arvind R, Anita Mahadevan, and Madhav Rao,
Mythri 1.0—Progress of an Indian Surgical Robot,
Indian Journal of Neurosurgery, Vol. 9, 95-98, 2020.
-
Ravali P, Purbhasha Panda, and Madhav Rao,
Design and Analysis of Ultra-Low Power Adiabatic Computational Subsystem Based on Symmetric Stacking,
2020 24th International Symposium on VLSI Design and Test (VDAT), July, 2020.
-
Vinay C K, Vikas Vazhayil, and Madhav Rao,
Design of a portable anthropomimetic upper limb rehabilitation device for patients suffering from neuromuscular disability,
2020 42nd Annual International Conference of the IEEE Engineering in Medicine & Biology Society (EMBC)), July, 2020.
-
Vinay C K, Vikas Vazhayil, and Madhav Rao,
Design of a real time portable low-cost multi-channel surface electromyography system to aid neuromuscular disorder and post stroke rehabilitation patients,
2020 42nd Annual International Conference of the IEEE Engineering in Medicine & Biology Society (EMBC)), July, 2020.
-
Ronak Doshi, Arvind Ramsankar, Aravind Reddy, Kirit Arumalla, Anita Mahadevan, Vikas Vazhiyal and Madhav Rao,
Design And Development Of A Flexible Robotic Operative Microscope For Surgical Applications,
2020 42nd Annual International Conference of the IEEE Engineering in Medicine & Biology Society (EMBC)), July, 2020.
-
Pon Deepika P, Sriram Marisetty, Pavan Kumar Pothula, Vinay K, Vikas Vazhiyal, Srikanth T K, and Madhav Rao,
Towards an autonomous neuro-navigation system for robotic neurosurgery, ,
2020 42nd Annual International Conference of the IEEE Engineering in Medicine & Biology Society (EMBC)), July, 2020.
-
Sriram Marisetty, Pavan K, Pon Deepika, Vinay C K, Vikas Vazhayil, and Madhav Rao,
A step towards an automated drilling device for neurosurgical applications,
2020 42nd Annual International Conference of the IEEE Engineering in Medicine & Biology Society (EMBC)), July, 2020.
-
Sriram Marisetty, Pavan K, Pon Deepika, Vinay C K, Vikas Vazhayil, and Madhav Rao,
System Design of an Automated Drilling Device for Neurosurgical Applications,
2020 5th Asia-Pacific Conference on Intelligent Robot Systems (ACIRS), July, 2020.
-
Ajay Ramesh, Nithin Raj, T K Srikanth, and Madhav Rao,
Design of a tactile audio gallery for visually impaired students,
2019 IEEE SENSORS, October, 2019.
-
Nithin Raj, Ajay Ramesh, T K Srikanth, and Madhav Rao,
Live Demonstration : A tactile audio gallery for visually impaired students,
2019 IEEE SENSORS, October, 2019.
-
Pranav Kedia, Pranav Aggrawal, and Madhav Rao,
Design and development of an autonomous in-seat passenger state identification in a modern vigilance enabled public transportation system,
2019 IEEE International Conference on Vehicular Electronics and Safety (ICVES), September, 2019.
-
Prajwal Sharma, Vinay K, Krishna Nagaraj, Vikas Vazhayil, and Madhav Rao, Design of a minimally invasive ECG regulated ventricular assistive device,
CSI Transactions on ICT, 7, 167-174,2019.
-
Pranav Kedia, Pranav Aggrawal, and Madhav Rao,
A dual threshold voltage modified dynamic power cutoff technique to consolidate leakage and speed in a VLSI subsystem,
2019 IEEE International Conference on Electronics, Computing and Communication Technologies (CONECCT), July, 2019.
-
Vinay C K, Vikas Vazhiyal, and Madhav Rao,
Design of a non-invasive pulse rate controlled deep vein thrombosis prophylaxis lower limb device,
2019 41st Annual International
Conference of the IEEE Engineering in Medicine and Biology
Society (EMBC), 23-27 July, Berlin, Germany, 2019.
-
Neha Oraon, and Madhav Rao,
Development of design models for nanomagnetic logic based combinatorial subsystem,
2019 IEEE 19th International Conference on Nanotechnology (IEEE-NANO), July, 2019.
-
Madhav Rao, Research Highlights, CSI transactions on ICT, Springer India, pp 1-8, May, 2019.
- Vikas Vazhiyal, Madhav Rao, Manish Beniwal, Nishanth Sadashiva, Narasinga Rao, Kannepalli Venkata Lakshmi, and
Sampath Somanna, An Overview of Robotics in Functional Neurosurgery,
Indian journal of neurosurgery, Thieme, pp 6-10, April, 2019.
-
Neha Oraon, and Madhav Rao,
Delay approximation for nanomagnetic logic based combinatorial circuits,
2019 IEEE 14th International Conference on Nano/Micro Engineered and Molecular Systems (NEMS), April, 2019.
-
SARL along with Vision Empower
filed a provisional patent on "AN AUDIO-TACTILE DEVICE TO ASSIST LEARNING/COMPREHENSION OF DIAGRAMS"
Application ID: 201941007438 on 26th February, 2019. The inventors of this device are K Nithin Raj (IIITB), Ajay Ramesh R (IIITB),
Dr. Madhav Rao (IIITB), Mr. Rajagopal N (Vision Empower), Aditya Vikram M (Vision Empower), Vidya Y (Vision Empower),
and Supriya Dey (Vision Empower).
-
Prajwal Sharma, Prashanthi K, Krishna Nagaraj, Vinay Chandraekhar, Vikas Vazhiyal, and Madhav Rao,
Design and analysis of a minimally invasive and ECG controlled Ventricular Assistive Device,
2019 32nd International Conference on VLSI Design and 2019 18th International Conference on Embedded Systems (VLSID), January 5-9, New Delhi, India, 2019.
-
Prajwal Sharma, Prashanthi K, Krishna Nagaraj, Vikas Vazhiyal, and Madhav Rao,
Development of a minimally invasive Ventricular Assistive Device, IEEE Sensors 2018 conference,
October 29-31, New Delhi, India, 2018.
-
Neha Oraon, and Madhav Rao, Stick diagram representation for nanomagnetic logic based combinational circuits,
18th IEEE International Conference on Nanotechnology 2018 conference, July 22-26, Cork Island, Ireland,
2018.
-
Madhav Rao, and Sowmya N, Design and analysis of High Impedance surface modified 3D antennas ,
CSI Transactions on ICT, Springer India, pp 1-5, May, 2018
-
Madhav Rao, Electrical modeling of copper/multiwalled carbon nanotubes
for 3D IC applications , 17th IEEE International Conference on Nanotechnology 2017 conference, July 25-28, Pittsburgh, USA.
-
Kumaresh K, Gopika G, Madhav Rao, and Neelam Sinha,
Cognitive State Signature Analyses Using Single Channel EEG Data ,
25th European Signal Processing Conference (EUSIPCO 2017), January 7-11, September, 2017, Kos Island, Greece.
-
[Indian Patent Application no. 201741025128] Vinay Chandrashekar, Madhav Rao, Vikas V, Laxmi Rao, AN ELECTRICALLY CONTROLLED MECHANICAL INTEGRATED WEARABLE DEVICE TO ASSIST MOVEMENT OF FINGERS AND WRISTS, July, 2017.
-
[Indian Patent Application no. 201741024666] Aravind Reddy, Krishna Nagaraj, Vinay Chandrashekar, Madhav Rao, Vikas V, Laxmi Rao, Subhajit Sen, Debabrata Das, Srikanth T K, Muralidhara V N, A FLEXIBLE SURGICAL DEVICE, July, 2017.
-
Madhav Rao, Vertical Delay Modeling of Copper/Carbon Nanotube Composites in a Tapered
through Silicon Via , 67th IEEE conference in Electronic Components and Technology Conference (ECTC), May, 2017, Orlando, USA.
-
Gaurangi Gupta, A R Harish, and Madhav Rao, Performance Enhancement of 3D Posts based Antenna using High Impedance Surface ,
IESC, April 2017, Shillong, India.
-
[Indian Patent Application no. 201641011051] Vinay Chandrashekar, Madhav Rao, WEARABLE INTEGRATED SYSTEM TO AID PARKINSON DISEASE PATIENTS IN OVERCOMING FREEZING OF GAIT POSITION , March, 2017.
-
Madhav Rao, Electrical Modeling and Characterization of Copper/Carbon
Nanotubes in Tapered through Silicon Vias ,
VLSI Design and 2017 16th International Conference on Embedded Systems, January 7-11, January, 2017, Hyderabad, India.
-
Madhav Rao, and Sowmya N,
Design and analysis of through dielectric copper posts based 3D antenna ,
International Symposium of Antennas and Propogation (ISAP-2016), October 26-30,
Okinawa, Japan, 2016.
-
Madhav Rao, Electrical modeling of copper/carbon nanotubes for 3D integration
, 16th IEEE International Conference on Nanotechnology 2016 conference, August 22-25, Sendai, Japan,
2016.
-
Madhav Rao, and Neha Oraon Analysis of switching energy and delay for magnetic logic devices ,
IEEE Computer Society of Annual Symposium of VLSI (ISVLSI-2016), July 11-13, Pittsburgh, USA, 2016.
-
Neha Oraon, and Madhav Rao Study of ferromagnetic dot shapes for digital logic applications ,
18th International workshop on Physics of Semiconductor Devices (IWPSD-2015) ,
December 7-10, Bangalore, India, 2015.
-
Putluru Sravani, Gaurangi Gupta, A R Harish, and Madhav Rao
Design of 3D Posts based antenna , International Symposium of Antennas and Propogation(ISAP-2015),
November 9-12, Tasmania, Australia, 2015.
-
Madhav Rao, A solder based self assembly process to form metal
embossing on three dimensional structures , 15th IEEE International Conference on Nanotechnology 2015
conference , July 27-30, Rome, Italy, 2015.
-
Sowmya N, Neha Oraon, Subhajit Sen, and Madhav Rao, Development of 3D shadow mask using 3D printer
, 2015 IEEE International Conference on Electronics, Computing and Communication Technologies, July 10-11, Bangalore, India, 2015.
-
Madhav Rao, Neha Oraon and Ranganatha S, Design and analysis of magnetic logic device for next generation data processing
, 19th International Conference on VLSI Design and testing 2015, June 28-29, Ahmedabad, India, 2015.
-
Madhav Rao, J. C. Lusth, S. L. Burkett, A solder based self assembly project in an
Introductory IC fabrication course , American Journal of Engineering Education, Vol. 6, Issue. 1, June, 2015.
-
Putluru Sravani and Madhav Rao, Design of 3D antennas for 24 GHZ ISM band applications ,
28th IEEE International Conference on VLSI Design 2015 , January 3-7, Bangalore, India, 2015.
-
Rahul R, Ashwin Whitchurch and Madhav Rao, An open source graphical robot programming environment
for undergraduates , 2nd IEEE International Conference on MOOCs, Innovation and Technology in Education ,
December 19-20, Chandigarh, India, 2014.
-
Neha Oraon, and M. Rao, Study of solder based self assembled 3D micro scale structures via surface evolver , 2nd IEEE International Conference on Emerging Electronics "Materials to
Devices", December 3-6, Bangalore, India, 2014.
- M. Rao, Solder based self assembled structures for 3D integration, Advanced Materials Research, vol. 875-877, February, 2014.
-
Yashvanth Kondi, Daksh Varshney, Sruthi K and Madhav Rao, An
Interdisciplinary, Dialogic Approach to Develop an Electronic Device to Enhance Freedom and Mobility of Women in Public Spaces in the Indian Context -
Illustrated by the Case of Convers[t]ation, IEEE GHTC-SAS 2014 conference , September 26-27,
Trivandrum, India, 2014.
-
M. Rao, Neha Oraon, and Putluru Sravani, Self assembly based high frequency 3D heatsink antenna,
IEEE Regional TENSYMP 2014 conference, April 14-16, Kuala Lumpur, Malaysia, 2014.
-
Neha Oraon, Punith Kumar M. K, Chandan Srivastava, and M. Rao
Self assembly based 3D heatsink antenna for high density 3D integration,
International IEEE conference of Circuits, Controls, and Communication, Bangalore, December 27-28, 2013.
*The paper was adjudged as the best paper in the conference. - M. Rao, J. C. Lusth, and S. L. Burkett, Demonstration of electrical connectivity between self assembled structures, Journal of Vacuum Science Technology-B, vol. 31, issue. 3, May, 2013.
- Neha Oraon, J. C. Lusth, S. L. Burkett, and M. Rao, Simulation studies of self assembled 3D structures, AVS 60th International Symposium & Exhibition (AVS '13), Longbeach, California, USA October 27 - November 1, 2013.
- S. Burkett, M. B. Jordan, M. Rao, R. Divan, A. V. Sumant, and L. Ladani, Growth of Carbon nanotubes inside a silicon via to enable IC stacking applications, in International Vacuum Congress Conference, Paris, France September 9-13, 2013.
- M. Rao, Electric current driven polarity change of nanomagnets, IEEE international multi conference on automation, computing, control, communication and compressed sensing conference, Palai, India on March 22-23, 2013.
- Mitali Sodhi, and Madhav Rao, Development and simulation of Pacman Game using Multi-Client Architecture via Player/Stage Tool , 5th International Conference on Recent Trends in Information, Telecommunication and Computing - ITC 2014, March 21-22, Chandigarh, India, 2014.
- M. B. Jordan, M. Rao, A. V. Sumant, R. Divan, and S. L. Burkett, Filling through Silicon vias with a carbon nanotube/copper matrix, AVS 59th International Symposium & Exhibition (AVS '12), Tampa, Florida, USA October 28 - November 2, 2012.
- M. B. Jordan, M. Rao, A. V. Sumant, R. Divan, and S. L. Burkett, Process flow for growing aligned Carbon nanotubes in blind vias, Global interposer workshop, November 2012. *The paper was adjudged as the best paper in the conference.
- M. Rao, Solder based self assembled structures for three dimensional integration, International conference on Advanced Material and Manufacturing Science (ICAMMS), Beijing, China on December 20-21, 2012.
- M. Rao, 3D damascene and embossing via solder based self assembly process, presented at the 2nd International Conference on Nanotechnology, Pune on October 18-19, 2012.
- M. B. Jordan, M. Rao, A. V. Sumant, R. Divan, and S. L. Burkett, Process flow for CNT interconnects grown in blind TSVs, International materials research congress conference on August 12-17, Cancum, Mexico, 2012. *The paper was adjudged as the third best paper in the conference.
© 2014 Madhav Rao
Thanks to Jaya Sreevalsan-Nair
Template design by Andreas
Viklund / Best hosted at www.svenskadomaner.se